桥梁板式支座价格
板式桥梁支座是桥跨结构的支撑部分。其作用是将桥跨结构上的荷载通过支座传递给墩台。支座的作用主要表现在一下三个方面:
1、 使反力明确地作用到墩台的*位置,并将集中反力扩散到一个足够大的面积上,以保证墩台工作的安全可靠 2、 保证桥跨结构在支点按计算图式所规定的条件变形 3、 保证桥跨结构在墩台上的位置充分固定,不至滑落
在桥梁结构中,板式橡胶支座是桥梁上、下部结构的连接点,其作用是将上部结构的荷载顺适、安全地传递到桥墩台上去,同时保证上部结构在荷载、温度变化、混凝土收缩等因素作用下的自由变形,以便使结构的实际受力情况符合计算图式,并保护梁端、墩台帽不受损伤。这就要求它具有足够的竖向刚度和弹性,能将桥梁上部结构的全部荷载可靠地传递到墩台上,并同时承受由荷载作用引起的桥跨结构端部的水平位移、转角和变形,减轻和缓解桥墩承受的震动,适应因温度、湿度变化引起的桥跨结构胀缩。
就板式橡胶支座的安装位置而言,虽然在使用中可以进行更换,但更换的成本费用、技术性以及困难性均很大,桥梁*部分支座可谓是*性的安装,支座寿命应该与桥梁的寿命相吻合,否则会对桥梁的使用造成不良的后果。尽管在桥梁的成本造价中支座成本仅占很小的比例,但作用远远**过其成本,为此,支座就成为桥梁建设和使用的重要材料之一。
近年来在支座使用过程中,支座出现了各种各样的质量问题和质量隐患,究其原因可分为产品质量、施工质量和设计选型三方面。
板式橡胶支座的产品质量、施工质量和设计选型关系到橡胶支座的使用寿命,需要生产方、施工方和设计方的紧密配合,任何一方出现问题都将严重影响橡胶支座的使用寿命。
板式橡胶支座的后期养护时要注意:板式橡胶支座每隔一段时间就应该进行养护和维修,这样可以有力的保证公路桥梁的安全使用。
Pay attention to the late maintenance of the plate rubber bearing: the plate rubber bearing should be maintained and repaired at regular intervals, which can effectively ensure the safe use of the road bridge.
检查橡胶支座是否出现滑移或者脱空现象橡胶支座是否剪切位移角度是否在35°以内,如果过大就应该调换了。
Check if the rubber bearing slips or becomes empty. Is the rubber bearing's shear displacement angle within 35°? If it is too large, it should be changed.
橡胶支座出现严重变形;橡胶支座的外层橡胶层是否开裂是否老化,如果开裂应该记录开裂位置及其宽度以保证后期抓紧时间更换。
The rubber bearing is severely deformed; whether the outer rubber layer of the rubber bearing is cracked or not, if cracking, the cracking position and its width should be recorded to ensure the replacement of the later tightening time.
橡胶支座中间各层加劲钢板之间的橡胶板是否受力均匀是否凹凸不正常。
Whether the rubber sheets between the steel plates in the middle of the rubber support are evenly stressed or not.
板式橡胶支座在公路桥梁中起着重要的作用,为了保证公路桥梁的正常时候应该对于支座进行定期检查保养。
The plate rubber bearing plays an important role in the highway bridge. In order to ensure the normal condition of the road bridge, the support should be regularly inspected and maintained.
橡胶支座是连接桥梁上下部结构的纽合点,构造精微,由于野外环境影响,*病害,一旦损坏,将严重影响桥梁的承栽能力和使用寿命,必须进行更换处理,以保证桥梁处于正常的使用功能状态。
The rubber bearing is the matching point of the upper and lower structure of the bridge. The structure is subtle. Due to the influence of the field environment, it is easy to be diseased. Once damaged, it will seriously affect the bearing capacity and service life of the bridge. It must be replaced to ensure that the bridge is in normal condition. Use the feature status.
通过对桥梁橡胶支座损害原因分析,提出用矮千斤顶更换支座的施工工艺,既科学、实效,又简便、安全,具有较强的适用效果和参考意义。
Through the analysis of the causes of the damage of the bridge rubber bearing, the construction technology of replacing the bearing with the short jack is proposed, which is scientific, practical, simple and safe, and has strong application effect and reference significance.