钢纤维的直径或等效直径合格率不得低于90%,可采取重量法检验,每批次抽检100根,用天平称量,卡尺测其长度,要求得到的等效平均值满足规定。
原材料的检验:
必须满足上述原材料的质量控制标准,应按照公路工程施工技术规范的要求进行检验。
钢纤维混凝土的检验:
应重点检验钢纤维混凝土的和易性、塌落度和水灰比等,同时必须现场目检钢纤维在混凝土的分布情况,发现有钢纤维结团现象应延长拌和时间。
钢纤维混凝土弯拉强度(抗折强度)。
钢纤维混凝土用于公路路面、机场道面、或其它采用弯拉强度为设计指标的结构时,与钢纤维混凝土相应的集体混凝土的弯拉强度设计值的分级和使用范围,可按国家现行有关水泥混凝土路面、机场道面等行业设计规范的规定采用。
钢纤维混凝土弯拉强度设计值fftm=ftm(1+αtm?ρf?lf/df);
其中,fftm,ftm--钢纤维混凝土弯拉强度标准值,设计值;
αtm--钢纤维对钢纤维混凝土抗拉强度影响系数,宜通过试验确定;
ρf--钢纤维体积率(即钢纤维掺量体积率);
lf--钢纤维长度;
df--钢纤维直径或等效直径;
lf/df--钢纤维长径比。
钢纤维混凝土弯拉强度(抗折强度)。
钢纤维混凝土用于公路路面、机场道面、或其它采用弯拉强度为设计指标的结构时,与钢纤维混凝土相应的集体混凝土的弯拉强度设计值的分级和使用范围,可按国家现行有关水泥混凝土路面、机场道面等行业设计规范的规定采用。
钢纤维混凝土弯拉强度设计值fftm=ftm(1+αtm?ρf?lf/df);
其中,fftm,ftm--钢纤维混凝土弯拉强度标准值,设计值;
αtm--钢纤维对钢纤维混凝土抗拉强度影响系数,宜通过试验确定;
ρf--钢纤维体积率(即钢纤维掺量体积率);
lf--钢纤维长度;
df--钢纤维直径或等效直径;
lf/df--钢纤维长径比。
Flexural tensile strength (flexural strength) of SFRC.
When steel fiber concrete is used in highway pavement, airport pavement, or other structures with bending tensile strength as the design index, the classification and application range of bending tensile strength design value of collective concrete corresponding to steel fiber concrete can be adopted according to the current national design specifications for cement concrete pavement, airport pavement and other industries.
The design value of flexural tensile strength of SFRC is FFTM = FTM (1 + α TM? ρ f? LF / DF);
Among them, FFTM, FTM - standard value of flexural tensile strength and design value of SFRC;
The influence coefficient of α TM steel fiber on the tensile strength of steel fiber reinforced concrete should be determined by test;
ρ F - volume ratio of steel fiber (i.e. volume ratio of steel fiber content);
LF - steel fiber length;
DF - diameter of steel fiber or equivalent diameter;
LF / DF - length diameter ratio of steel fiber.
钢纤维混凝土抗拉强度:
钢纤维混凝土抗拉强度,可通过试验所得的劈裂抗拉强度乘以强度折减系数0.80确定,劈裂抗拉强度试验方法按GB J81规定进行。
钢纤维混凝土抗拉强度标准值fftk=ftk(1+αt?ρf?lf/df);
其中,fftk,ftk--钢纤维混凝土抗拉强度标准值,设计值;
αt--钢纤维对钢纤维混凝土抗拉强度影响系数,宜通过试验确定;
ρf--钢纤维体积率(即钢纤维掺量体积率);
lf--钢纤维长度;
df--钢纤维直径或等效直径;
lf/df--钢纤维长径比